Yes, even with visible mold, a professional inspection is recommended. It uncovers hidden growth behind walls, under floors, or in HVAC systems; identifies the root cause (like leaks or humidity); and provides documentation for insurance claims or remediation planning. DIY visuals often miss 70-80% of the total infestation based on our Florida field experience.

A standard residential inspection (up to 2,500 sq ft) usually takes 1-2 hours, depending on property size, accessibility, and complexity. Commercial inspections or those requiring extensive sampling may take 3-4 hours or more. We’ll provide a detailed report within 24-48 hours after lab results (if testing is included).  

No, not always. If visible mold is extensive and the source is clear, remediation can proceed without testing. However, testing is crucial for health concerns, identifying hidden mold, species identification (e.g., toxic species), baseline air quality, or insurance/post-remediation clearance. We recommend it in about 60% of Florida cases due to high humidity.

Stop the moisture source immediately (fix leaks, reduce humidity below 60% with dehumidifiers). Avoid disturbing visible mold to prevent spore spread. Contact JRG for a prompt inspection—we prioritize South Florida properties. Do not attempt bleach cleanup yourself, as it doesn’t address roots or hidden growth.  

It depends on the cause. Sudden, accidental water damage (e.g., burst pipe) is often covered up to policy limits, but gradual leaks, floods, or poor maintenance are typically excluded. Florida law requires insurers to offer limited mold coverage endorsements. JRG assists with claims documentation to maximize approval chances.  

Maintain indoor humidity below 50-60% with AC and dehumidifiers. Ensure proper ventilation in bathrooms, kitchens, and attics. Fix leaks within 24-48 hours. Use mold-resistant paints/products in high-risk areas. Schedule annual HVAC inspections and elevate items in crawl spaces. JRG offers prevention consultations post-inspection.

You’ll receive a detailed report with photos, findings, lab results (if tested), moisture readings, and remediation recommendations. We can oversee the project as your advocate, bidding out to licensed remediators, ensuring protocol compliance, and performing clearance testing. This neutral oversight often saves 20-30% on costs.

Yes, all JRG inspectors are Florida-licensed Mold Assessors (MRSR or MRSA). We carry errors & omissions insurance and follow IICRC S520 standards for professional mold assessment.

Mold inspection is a visual and non-invasive assessment of your property to identify visible mold, moisture sources, and conditions that promote mold growth. Mold testing involves collecting air, surface, or bulk samples to laboratory-analyze for mold types and spore counts. JRG performs both to give you a complete picture—inspection spots the problem areas, while testing

there are different pricing models, but a fairly accurate rule of them is… Mold Removal / Mold Remediation from a professional and licensed contractor can run roughly $100 per square foot of visible mold growth.